Advertisement
Available languages
Available languages
PLAYBACK
¢ Switch on your amplifier or receiver.
eSet
the TAPE
MONITOR
switch on your amplifier
or receiver
to the TAPE
position.
© Operate the deck in numerical order as illustrated below:
2)
eo.
e
e
2
3]
4)
e
PHONES
Playback sound is fed into the headphone
set.
POWER
Push the switch to turn "ON'' (a=) the power.
Cassette Compartment Cover
Load
the cassette
tape.
DOLBY
NR
For recordings made without Dolby NR, set to "OFF''.
For recordings made with Dolby B NR, set to "'B''.
(The B-NR indicator will 'light up.) .
For recordings made with Dolby C NR, Set to "'C''.
(The C-NR indicator, will light up.)
RECORDING
* Switch
on the source
component
(tuner, amplifier,
etc.).
«Set the TAPE
MONITOR switch on your amplifier or receiver to the SOURCE
position.
e
.3
12]
@ PLAY
Push
the PLAY
button.
e When playback is finished, press the stop (g@ STOP) button.
eTo restart the tape, press the PLAY (®PLAY) button.
elf different
types of Dolby Noise
Reduction
are used for
record and playback,
playback
response
will be adversely
effected.
Note:
If the power
switch is turned OFF in either the re-
cording
or playback
mode, the cassette cannot be
removed,
even
if:the EJECT
button
is pressed.
Please
turn the power. switch ON
again,
and
then
in stop mode,
press
the
EJECT
button
to remove
the cassette tape.
FULL LOGIC CONTROL 7 BIAS ADJUST SYSTEM
Advertisement
