Chapter 1 - System Configuration; Computer; Software; Tools - Yamaha CRW4216E Series User Manual

Chapter 1 - System Configuration
Before using the CRW4216E, make sure that you have all of the items
on the list of included items.
In order to use the CRW4216E, you will require the following.

Computer

The following operating environment is required:
• An IBM/AT compatible computer with a 100 MHz or faster Pentium
• A vacant IDE interface connector
• A vacant half-height bay
• Windows 95, Windows NT4.0 or Higher
• Sufficient hard disk space
Note: You will need about twice as much space on your hard disk as that
required by the data you wish to write to CD-ROM.

Software

Use writing software or packet writing software which supports the
CRW4216E.

Tools

Phillips screwdriver
This is used to remove the
cover of your computer,
and to install the Yamaha CRW4216E drive.
Long nose pliers
These are used to insert or remove
the jumper pin when setting the
MASTER/SLAVE settings of the
Yamaha CRW4216E drive.
CPU (in order to write at 4x speed), or a 100 MHz or faster 486 CPU
(in order to write at 2x speed)

Chapter 1 - System Configuration

Phillips Screwdriver
Long nose pliers
3