Psk Authentication Configuration Example - 3Com AP9152 Quick Configuration Manual

Click Apply.
# Bind the corresponding radio to wireless services office and research respectively, enable the
wireless service s office and research, and enable the radios.
4) Verify the configuration
Select Summary > Client from the navigation tree, and enter the page shown in
online clients.
Figure 3-10 View the online clients
On this page, you can see that client 2, which accesses the SSID office, is in VLAN 3, while client 1,
which accesses the SSID research, is in VLAN 2. Because the two clients are in different VLANs, they
cannot access each other.
Configuration guidelines
When satisfied with the configuration
Point restarts.
PSK Authentication Configuration Example
N etwork requirements
As shown in Figure
authentication. The PSK key configuration on the client is the same
Figure 3-11 Network diagram for PSK authentication configuration
IP network
C onfiguration procedure
1) Select a correct country/regio
Select Advanced > Country
country/region code, as shown in
2) Configure a wireless service
# Create a wireless service.
Select Wireless Service > Access Service from the navigation tree, and click New to enter the page
for creating a wireless service, as shown in
Save Configuration to File
3-11, it is required that the client acce
FAT AP
L2 swit ch
n code
/Region Code from the navigation tree to enter the page for setting a
Figure 3-2.
Figure
to ensure it is not lost when the Access
ss the wireless network by passing PSK
as that on the AP, that is, 12345678.
Client
3-12:
3-5
Figure 3-10 to view the