Table of Contents
Advertisement
lens barrel.
[GA645]
The lens hood is mounted by screwing it into the front ol
the lens barrel.
[GA645W]
The lens hood is mounted by placing the indicator on the
lens hood upward as shown in the figure, putting the hood
into the front of the lens barrel and turning it to the right till
it is locked.
e Please use the respective hood for the respective
camera. If the hood for GA645 is used on GA645W, an
eclipse will be made on pictures.
@ When taking pictures by using filters with exposure fac-
tors, exposure compensation is necessary.
e Be sure to use the lens hood that comes with your
camera. If you are using other hoods, we cannot guar-
antee correct focusing because light entering the
Autofocus Window may be blocked.
5. Attaching the viewfinder eyepiece (Fig. 13)
The viewfinder eyepiece that comes with your camera has
а —1.0 diopter. If you cannot focus clearly through the
viewfinder, four optional eyesight adjustment lenses (the
same as those for the FUJIFILM GW series) are available
ATTACHING THE ACCESSORIES
1. Attaching the neck strap (Fig. 9)
* Anti-loosening Ring (Fig. 9-A)
* Buckle (Fig. 9-B)
D Pass both ends of the strap through the camera's
Strap Lugs.
2) Adjust the strap length with the Buckles.
e When you pass the strap through the Strap Lugs, slide
the Anti-loosening Rings. The strap ends will pass
through them easier.
2. Using the soft case (Fig. 10)
Use the Soft Case when carrying the camera about or put-
ting it away. It is a good protection against dust, dents and
scratches.
e A semi-hard case is also available as an optional ac-
Cessory.
3. Putting on the lens cap (Fig. 11)
To prevent accumulating dust and debris on the lens
glass, put the lens cap on as soon as you are through tak-
ing pictures. To clean the lens, refer to "Cleaning the lens"
on page 13.
4. Putting on the filter and lens hood (Fig. 12)
* Indicator (Fig. 12-A)
The filter is mounted by screwing it into the front of the
HSI19N3
Advertisement
Table of Contents
