Download Print this page

Assembling The Garden Pruner - Stihl GTA 26 Instruction Manual

Hide thumbs Also See for GTA 26:

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1

7 Assembling the Garden Pruner

6.3
Displaying State of Charge
1
► Insert battery.
► Press the button (1).
The LEDs emit green light for about 5 seconds
and indicate the state of charge.
► If the LED on the right flashes green: Charge
the battery.
6.4
LEDs on Garden Pruner
The LEDs can show the state of charge or mal‐
functions. The LEDs can glow or flash green or
red.
The state of charge is indicated when the LEDs
glow or flash green.
► If the LEDs glow or flash red: Troubleshooting,
18.
There is a malfunction in the garden pruner or
battery.
6.5
LED on Charger
The LED indicates the operating status of the
charger or faults. The LED can glow or flash
green or red.
If the LED glows or flashes green, the battery is
being charged.
► If the LED glows or flashes red: Troubleshoot‐
ing,
18.
There is a malfunction in charger or battery.
7
Assembling the Garden
Pruner
7.1
Removing and Fitting the Bar
and Chain
7.1.1
Removing the bar and chain
► Switch off the garden pruner and remove the
battery.
0458-694-9821-B
80-100%
60-80%
40-60%
20-40%
0-20%
► Raise the grip (1) of the wingnut (2).
► Rotate the wingnut (2) counterclockwise until
► Remove the chain sprocket cover (3).
► Remove the bar and chain.
7.1.2
The bar and chain combinations that can be
used with the chain sprocket are listed in the
specifications,
► Fit the chain in the bar groove so that the
► Fit the guide bar and chain on the garden pru‐
The guide bar may be either way round. The
logo on the guide bar may also be upside down.
► Tension the chain.
► Fit the sprocket cover so that it is flush with
► Rotate the wingnut clockwise until the chain
2
1
3
the chain sprocket cover (3) can be removed.
Mounting the bar and chain
20.1.
arrows on the tie straps on the top of the bar
point in the direction of rotation.
ner and check the following points:
– Chain drive links are seated in teeth of
chain sprocket (1).
– Peg (2) is located in guide bar's slot.
– Collar stud (3) is located in guide bar's slot.
the garden pruner.
sprocket cover is firmly seated.
English
2
3
1
13

Advertisement

loading