Table of Contents
Advertisement
□
fnjNER
TV
VCR I
CD CD CD CD
? TV/VCR A
VCfll
TAPE
o o o
o
o o o o o
6
7
8
9
0
O O o O CD
CD CD
W
CD
DECK1/2
CD CD a
CD
CIO
TTOSTTf KVqp
O D
MUTING
VOLUME
+
□ C
REMOTE CONTROL TRANSMITTER
AUDIO
RAK-SA011XH
| To control the compact disc piayer
[CD]
Press this button to switch the numeric buttons to control the CD
player/changer.
NOTE
In this case, the input of the receiver also switches to compact
disc mode.
If a Technics CD changer is used in combination with this unit,
the disc to be played can be selected by first pressing this button
and then pressing the appropriate numeric button (0 - 0).
(Tj — [o]r | cp+to
Press these buttons to select the desired track.
Playback begins from the track selected.
When these buttons are used, be sure to first press the "CD" but¬
ton.
Tracks 1-9:
Press the appropriate numeric button [T] - [5] directly.
To select a two-digit track number over 10:
Press the |cd+io| button the necessary number of time to select
the "tens" digit, and then one of the 00 - @ buttons to select the
"units" digit.
PROQRAM MODE|
Press this button to select the desired play mode ("program
mode" or "sequential mode"). If you have a Technics changer,
you can select "delete mode".
Thni skip nmI
Press one of these buttons briefly to move the pick-up to the
beginning of a specific track.
[►PlAYl
Press this button to start play.
[■STOP |
Press this button to stop play.
1 To control the tape deck_|
[DECK 1/2]
Press this button to select the deck ("DECK 1" or "DECK 2") to
be controlled.
MplayH
Press one of these buttons to begin playback or recording, press¬
ing the button corresponding to the side of the tape to be played
back (or recorded).
► : For the "forward (A)" side of the tape
M
: For the "reverse (B)M side of the tape
NOTE
Depending on which Technics tape deck is used in combination
with this unit, tape deck 1 might be the "A''-side playback-only
type.
Press one of these buttons to advance or rewind the tape while
the unit is in the stop mode.
Press one of these buttons to select the desired tune while the
unit is in the play mode. (Only applicable to a Technics tape deck
with the "music select" functions.)
[■STOPl
Press this button to stop tape movement.
NOTE
When operating a compact disc player with a remote control sen¬
sor, face this remote control transmitter toward the remote con¬
trol sensor of the compact disc player.
21
Advertisement
Table of Contents
