Roland RA30 Owner's Manual page 38

Chapter 4 Try Out Some Handy Functions
@ Recording Tone Play
faa i C3
3
'SuafOrass Orgad Rue Stange Gule/Bass Synth Pino SFX Otten, Tore Select
Music Style
3. Press the Rec button for Recorder.
The light for the Rec button starts to flash, and the RA-30 is ready for recording.
* Pressing the Rec button again makes the button light go out and cancels this state.
* Approximately 5000 notes can be recorded.
5. To finish recording, press the Start/Stop button or Intro/Ending button to end the
performance.
6. To play back what you've recorded, press the Play button.
The Play button light comes on during playback.
* If the button's light doesn't come on when you press the Play button, it means that nothing is
stored in the recorder. If you want to do the recording over again, be sure to start at step 1.
7. If you want to stop playback of a recorded performance, press the Start/Stop button.
* If you want to do the recording over again, be sure to start at step 1.
* If you want not to hear a rhythm accompaniment, set the Tone at the maximum volume with
the Balance button (p.36).
@ Listening to a Song Repeatedly
Narbontt Tone
[tine
SariBrass Organ/Aue Sings Gula/Bate Synh Pino
' heel) ned} Rl
Music Styie
Rock Contemporsy Swing Lown Temcieonal Walt
hvolEndng — Stet! Stop
Hold down more
than 2 seconds
38