Roland RA30 Owner's Manual page 13

Chapter 1-2 Getting Ready for Connection to an Acoustic Piano
@ Making the Connections
To prevent malfunctions, and/or damage to speakers (or other equipment) be sure to
switch off all equipment, and turn the volume all the way down before making any con-
nections.
@ Installing the RA-30
Use a smail table that is at about the same height as the acoustic piano's keyboard. Be
sure to use a table that will not wobble or tip over easily.
Place the table to the left of the acoustic piano, and then put the RA-30 on top of the
table.
@ Plugging in the AC Adaptor
1. Plug the AC adaptor into the DC In jack on the rear panel.
* Be sure to use only the AC adaptor supplied with your RA-30.
2. Hook the AC adaptor cord around the cord hook.
You can prevent the plug from being accidentally pulled out.
3. Plug the AC adaptor into a power outlet.
@ Connecting to the Acoustic Piano
You need a KP-24 Acoustic Keyboard Pickup (sold separately) for connecting with an
acoustic piano.
13