Suzuki Jimny 2022 Manual page 138

BEFORE DRIVING
NOTE:
• Avoid covering the light sensor area of
the windshield with a sticker. The sticker
may impair the performance of the sen-
sor and make the system unable to con-
trol operation of the lights correctly.
• If you turned the ignition switch to "ON"
position remains selected, the headlights
and position lights come on automati-
cally as it gets dark outside, even with
the engine not running. Leaving the
lights lit for a long time may lead to a
completely discharged battery.
(3)
Front position lights, tail lights, license
plate light and instrument lights are on, but
headlights are off.
(4)
Front position lights, tail lights, license
plate light, instrument lights and headlights
are on.
3-25
55T030400
With the headlights on, push the lever for-
ward to switch to the high beams (main
beams) and pull the lever toward you to
switch to the low beams. When the high
beams (main beams) are on, a light on the
instrument cluster will come on. To
momentarily activate the high beams (main
beams) as a passing signal, pull the lever
slightly toward you and release it when you
have completed the signal.
Auto-on headlight system
(5)
80T030270
The auto-on headlight system automati-
cally turns on all lights that are operated by
the lighting switch, when the following
three conditions are all met.
Conditions for auto-on headlight system
operation:
1) It is dark around the light sensor (5).
2) The lighting switch is in "AUTO" posi-
tion.
3) You turn the ignition switch to "ON"
position.
This system is activated by a signal from
the light sensor (5) on the passenger side
of instrument panel. Do not cover the sen-
sor (5). Otherwise, the system will not work
correctly.
80TS - 01E