Mounting Positions - H3C S5800-54S Instruction Manual

Figure 4 Mounting brackets
(1) 1 U mounting brackets
(2) 2 U mounting brackets and cable management brackets
In addition to a pair of 1 U mounting brackets, the S5800-54S switch also
comes with a pair of chassis rails and a pair of slide rails.
Figure 5 Chassis rail and slide rail
(1) Chassis rail

Mounting positions

All switch models except the S5800-54S switch provide three mounting
positions: one front mounting position (near the network ports), one
mid-mounting position, and one rear mounting position (near the power
modules). Figure 6 shows the mounting positions on these switches.
(2) Slide rail
5