Installing The Switch In A Rack; Attaching An Esd Wrist Strap; Installation Accessories - H3C S5800-54S Instruction Manual

Installing the switch in a rack

Attaching an ESD wrist strap

Before installation, wear an ESD strap, and make sure one end of the wrist
strap has a good skin contact and the other end is attached to a post of the
correctly-grounded rack, as shown in Figure 3.
Figure 3 Attaching an ESD wrist strap

Installation accessories

All switch models except the S5800-60C-PWR switch come with a pair of 1 U
mounting brackets. The S5800-60C-PWR switch comes with a pair of 2 U
mounting brackets, and each mounting bracket is attached with a cable
management bracket.
4