Installing an OAP card
CAUTION:
When you install or remove an OAP card, do not touch the
•
surface-mounted components.
After you remove the OAP card, install the filler panel into the slot
•
immediately if no new OAP card is installed.
The S5800-60C-PWR switch provides an OAP card slot and comes with a
filler panel in the OAP card slot. You can install an OAP card as needed. For
the OAP cards available for the S5800-60C-PWR switch, see H3C S5800
Switch Series Installation Guide. For more information about OAP cards, see
H3C OAP Cards User Manual.
Figure 43 Removing the filler panel from an OAP card slot
Figure 44 Installing an OAP card
28