Table of Contents
Advertisement
[Raster Correction Circuit]
Adjustment purpose
To correct picture distortion.
14. Raster Correction
Symptom when
Distorted picture.
incorrectly adjusted
7. Write the data into memory. (Press "ENTER")
8. Terminate the circuit adjustment mode. (Press "MENU" twice)
Note: Adjustment 17 (Dynamic Convergence) must be performed immediately
after this adjustment.
Input signal
19 HSSS
14 V3RD
21 HSLN
10 HKEY
12 VSBW
18 H3RD
—PR~
Advertisement
Table of Contents
