Settings Prior To Operation; Setting The Current Day And Time - Rinnai CNTRLDRCINW Operation And Installation Manual

8.

SETTINGS PRIOR TO OPERATION

Setting the current day and time

1
2
3
4
5
6
Rinnai
Press the Timer button for 2 seconds or
more. The timer display will flash.
Press the button "
The selected date will flash.
The date setting is finished and the timer setting is
prepared after pressing Timer button or CONFIRM
button or do not press button for 10 seconds.
Press the button "
Press repeatedly to adjust the current time in 1-minute
To complete the setting, press the CONFIRM button or
do not press button for 10 seconds.
Time scale selection
Press the buttons "
alternate the clock display between the 12hr & 24hr scale.
" or " " to set the date.
" or " " to set the current time.
increments. Press and hold to
adjust the current time continuously.
" and " " for 2 seconds. This will
21 DRCi R32 Wired Controller OIM