Table of Contents
Advertisement
BASIC OPERATIONS
Press the REC switch (@).
® The recording indicator now lights.
® The play indicator is now flashing.
77 Press the PLAY switch (D> or <j).
Aute reverse function
This unit uses rotary type recording and playback heads, and
the same heads are used in both the forward and reverse
directions. Tape end detection is employed to control auto
reverse operation which takes place about 2 seconds after
the tape is taken up.
NOTE:
A leader tape having a length equivalent to about 5 seconds is
attached
to an
ordinary
cassette
tape.
This means
that for
two-way travel of the leader tape there will be a break of about 12
seconds in the sound. Be very careful of this, particularly when
making a two-way recording.
Pausing and restarting recording
Press the PAUSE
(ga ) switch.
® Recording will be suspended.
To restart recording again.
@ Press the PAUSE (M8 ) switch again.
STOPPING
PLAYING
AND
RECORDING
1
Press the STOP (i) switch.
Press the EJECT button and take out
the tape.
Questions (Q) and answers (A) on recording
Q: How is the recording level adjusted?
A: This unit has a built-in automatic
level control which
dispenses with the need to adjust the recording level.
Q: What is the difference between the operation of playing
a tape in one deck and recording the output onto a tape
in another deck (tape dubbing), and tape copying?
A For tape dubbing, Dolby NR is used on the playback side
hence the recording side is always a normal recording.
In other words, a tape which
has been made
by tape
dubbing is always played back with Dolby NR OFF.
PLAYING BACK THE COMPONENTS CONNECTED
TO THE CD OR VIDEO JACK
1
Use the FUNCTION switch to locate the
program source which is to be play that
source.
2
Playback the component to be used.
14
<ARB1072>
The illustration shows model
TURNTABLE |
aaa
Platter mat
:
RR
SPEED switch
ARM-ELEVATION
p<
switch
SIZE switch
Se
Arm
rest
™
Tonearm
" START/STOP switch
PL-777Z
RECORD
PLAY
Press the FUNCTION
switch and set it
to PHONO.
Place the record on the platter mat.
Remove the stylus cover and release
the tonearm
from the arm rest.
Set the SPEED switch.
Move the ARM-ELEVATION switch to the
UP position.
Move the tonearm by hand across the
record. At this stage, the platter starts
to rotate.
Move the ARM-ELEVATION switch to the
DOWN
position.
To stop the player while a record is being
played, press the STOP switch.
Press the FUNCTION
switch and set it
to PHONO.
Place the record on the platter mat.
Remove the stylus cover and release
the tonearm
from the rest.
Set the SPEED and SIZE switches.
Move the ARM-ELEVATION switch to the
DOWN position.
Push the START/STOP switch to
start record play.
To stop the player while a record is
being played, press the START/STOP
switch.
on
Of OP
WN
=
a © OI
GN
=
NOTE:
|
@ When play is completed, the tonearm will return automati-
cally to the arm rest.
® When playing 45 rpm records with large center holes, place
the EP adaptor onto the platter shaft.
Advertisement
Table of Contents
