Adjusting The Tone - Kenwood 107VR Instruction Manual

_ Adjusting the tone
@ Ensure that the SRS 3D and S.DIRECT
indicators are not lit.
@ Select the tone mode to be adjusted (from
—.. BASS, MIDDLE and TREBLE).
SOUND
© Adjust the tone
Qe,
aoe
a
To increase
ever IN ae
Levi
NTR
oly
To decease Sd
eve bad
The jevel can be adjusted between -8 and
+8 with an increment or decrement of 2
per press.
Adjusting the left/right sound balance
@ Ensure that the SURROUND, 3 STEREO
and S.DIRECT indicators are off.
_— @ Press the SETUP key twice.
SETUP
© Adjust the balance.
— To vecrease rand
tre ieft C
chanel sound — LEVEL
CONTROL
ie ro oscrease ~<D)
a the nght
chennel sound
— @ Press the SETUP key once or twice to
return to the previous input selector dis-
play.
SL a a
1O7VR [En]
Keys or controls to be used "1 this operation
Make sure that the light § cut
@if the S DIRECT indicator is lit, press the $.DIRECT key to turn it off
If the SRS 3D indicator is lit, press the SRS 3D key to turn it off
Each press of the key switches the modes as follows
(When the SRS 3D Stereo is OFF}
7: BASS Mode for adjusting the low frequencies.
2 MIDDLE : Mode for adjusting the middle frequencies.
3 TREBLE =: Mode for adjusting the high frequencies.
4 End of setting
Toc c 7
rt + ro
The aisplayed vaiue changes
Ti Make sure that the light 1s out
elf the SURROUND, 3STEREO or S.DIRECT indicators are lit, press the
STEREO key to turn them OFF
Positior of the left \ Ct Position of the right
speaxer indicates the center speaker
a
wee en Pe
Ind:cates the balance setting
Press twice if SUB-WOOFER has been set
Press once sf SUB-WOOFER has not been set
For how to set SUB-WOOFER 22,