Shift Lever; Fittings And Fasteners; Instruments, Lights And Switches; Control Cables - Yamaha YXZ 1000R 2021 Owner's Manual

EBU35690

Shift lever

The shift lever should move smoothly both
forward and backwards and return to its orig-
inal position after a gear change is made.
Check the shift lever and transmission for
roughness before starting off.
TIP
The engine may need to be started for the
transmission to engage gears.
EBU35700

Fittings and fasteners

Always check the tightness of chassis and
wheel fittings and fasteners before starting
off. Take the vehicle to a Yamaha dealer or re-
fer to the Service Manual for correct tighten-
ing torque.
EBU31840

Instruments, lights and switches

Check that all instruments, lights and switch-
es are working properly. Correct if necessary.
EBU31851

Control cables

When driving in cold weather, always make
sure all control cables work smoothly before
starting off. WARNING! Control cables can
freeze in cold weather and you could be
unable to control the vehicle.
EBU37895

Tires

Check and adjust the tire pressure before
each ride. Check tires for wear and damage.
Tire pressure
1. Tire pressure gauge
6-8
[EWB03280]
1
6