Yamaha YXZ1000R Installation Instructions

INSTALLATION INSTRUCTIONS
Winch Wiring Kit
DESCRIPTION:
2HC-F28M0-V0
PART NUMBER:
YXZ1000R
MODEL:
Please read and understand these instructions
completely before installation to avoid possible
injury, or damage to the accessory or vehicle.
NOTICE:
This installation requires a torque wrench and should
be performed by an authorized Yamaha dealer or
other qualified technician.
COMPONENTS NOT INCLUDED IN THIS KIT:
WARN Vantage 3000 winch P/N SSV-F740C-T0-00
Winch mounts to:
Desert Grab Bar w/Winch Mount P/N 2HC-F84L0-T0 or
Trail Grab Bar w/Winch Mount P/N 2HC-F84L0-S0
nd
2 Battery Wiring Kit P/N 2HC-H21B0-V0
2 nd Battery Box and Mount P/N 2HC-H212A-V0
PARTS LIST:
No. Part Number
-- 2HC-F28M0-V0
①
*
② *
③ *
④ *
⑤
*
* Part supplied with kit only and not available separately.
Jack for Winch Control unit
Cover for Jack
10/7/2015
©Yamaha Motor Corporation, U.S.A. All rights reserved.
Description
Winch Wiring Kit
Wire Harness for remote
Red Cable (+Battery to contactor)
Black Cable (-Battery to Contactor)
Yellow Cable (+Contactor to Winch)
Blue Cable (-Contactor to Winch)
①
②
③
Page 1 of 4
WARRANTY INFORMATION:
Genuine Yamaha Accessories are covered by a one-
year limited warranty against defects in material or
workmanship. Labor for replacement of defective
components is not covered. See your Yamaha dealer
for a copy of the warranty statement.
DEALER OR INSTALLER:
These instructions contain important information for
future reference and must be given to the customer.
2HC-F28M1-V0_2 WINCH WIRING KIT
Qty
--
1
1
1
1
1
④
⑤