Yamaha YXZ 1000R 2021 Owner's Manual page 46

1. Push the "RESET" button to select the
desired engine speed for activating the
shift light.
2. Push the "MODE" button to confirm the
selected engine speed. The shift light
flashes and the tachometer shows the
current setting r/min for the deactivation
point.
5
To set the deactivation point
TIP
 Be sure to set the deactivation point to a
higher engine speed than for the activation
point, otherwise the shift light will not come
on.
 The shift light deactivation point can be set
between 7000 r/min and 12000 r/min. The
deactivation point can be set in increments
of 500 r/min.
 The tachometer needle will start over at
7000 r/min after 12000 r/min.
1. Push the "RESET" button to select the
desired engine speed for deactivating the
shift light.
2. Push the "MODE" button to confirm the
selected engine speed. The display exits
the shift light control mode and returns to
the standard multi-function display mo-
de.
Error code display
1. Error code display
2. Engine trouble warning light "
This model is equipped with a self-diagnostic
device for various electrical circuits.
5-15
1 2
"