To Operate Cleaner - Panasonic QUICKDRAW MC-V5247 Operating Instructions Manual

TO OPERATE CLEANER
DO NOT use outlets above counters. Damage to items in the surrounding areas could
occur. Be sure the switch is in the off position while plugging the cord in.
NOTE: To reduce the risk of electric shock, this vacuum has a polarized plug, one blade is wider
than the other. This plug will fit in a polarized outlet only one way. If the plug does not fit fully in
the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper
outlet. DO NOT CHANGE THE PLUG IN ANY WAY.
1. Plug the power cord into a 120V outlet.
2. To start the vacuum cleaner, push the
switch to the ON positlon.
3. To stop the vacuum cleaner, push the
Switch to the OFF position.
The handle may be lowered 1. Upright position
to any position required.
Just step on the han- The handle locks in this
dle release pedal as | position for storage.
indicated by tho The handle should
illustration and lower always be in an upright
the handle as position when the
desired.
К
attachments are used.
2. Middle position 3. Low position
This position is for normal This position
cleaning. is used for
cleaning under
furniture.
-10-