To Select Connected Equipment - Philips 28PW9528 Manual

Connect extra loudspeakers/amplifier
multimedia loudspeakers
REAR
&
Select
Surround speakers On
menu, see p. 8.
é
Connect the audio cables to the rear
loudspeakers and to the Dolby Surround
output at the back of your TV.There is only
S
one output for both speakers.
"
Adjust the volume of the rear loudspeakers.
Use the Test tone function in the Speakers
menu, see p. 8.
Note: Once you have adjusted the volume of the
rear loudspeakers, do not change it while watching
TV as the whole configuration operates with the
volume adjustment of your TV.

To select connected equipment

Press the v key on the remote control repeatedly to select
to where you connected your equipment at the back or the right side of your TV.
Remark : Most equipment (decoder, recorder) carries out the switching itself, when it is switched on.
Cinema Link surround receiver
See the separate supplied Cinema Link instruction manual.
Attention: the sound info on screen will not correspond with the actual sound reproduction.
Recorder or DVD with EasyLink
The recorder (VCR or DVD+RW) or DVD can
be operated with the remote control via the
or
Recorder
DVD
Recorder
Ò
Rwd Play
DVD
Ò p
Prev. Play
in the Setup
menu on screen.
p ‡ π †
Stop Play Ffw
‡ π †
Stop Play Next Eject
Stereo amplifier and 2 extra front speakers
&
Select
menu, see p. 8.
é
Connect the audio cables to the audio input of
your amplifier and to
back of your TV.
"
Adjust the volume of the audio amplifier.
Use the Test tone function in the Setup,
Speakers menu, p. 8.
Note: Once you have adjusted the volume of the
external amplifier, do not change it while watching
TV as the whole configuration operates with the
volume adjustment of your TV.
&
Press the
é
Select the
cursor up/down.
"
Press the cursor left/right, up/down to select
one of the recorder or DVD functions.
®
Ï
The key ® for recording can be operated in the TV
Rec Eject
mode.
If your EasyLink recorder has the system standby
function, when you press the B key for 3 seconds,
Ï
both TV and the recorder are switched to standby.
in the Setup, Speakers
Centre mode On
AUDIO L
, ,
EXT1 EXT2 EXT3
key on the remote control.
MENU
Recorder or
DVD
and at the
R
or according
SIDE
menu with the
21