General; Source; Decoder; Demo - Philips 28PW9528 Manual

Set/Change code
The Child lock feature (see TV, Features, p. 13)
allows you to lock channels to prevent others
from watching certain programmes.To watch
locked channels, a 4-digit code must be
entered.The Set/Change code menu item
allows you to create or change a Personal
Identification Number (PIN).
&
Select Set/Change code
é
If no code exists yet, the menu item is set to
Set code.

Source

Source
Setup
This menu allows you to indicate the peripheral
you connected to one of the external inputs.
&
Press the cursor right to enter the list of types
of peripherals attached to the selected input.
é
Select the peripheral device with the cursor
up/down.

Decoder

Setup
If a decoder or a descrambler is connected, see
p. 20, you can define one or more programme
numbers as decoder programme numbers.
&
Select
Decoder
é
Select
Programme

Demo

TV
Setup
Auto demo
Demo
......
Install
Dealer demo - Digital options
10
.
EXT1
EXT2
EXT3
SIDE
(Centre input)
Decoder
Programme
Status
with the cursor right.
.
- Light sensor
- Comb filter
If a code has previously been entered, the
menu item is set to
instructions on screen.
Important:You have forgotten your code !
&
Select
Change code
press .
OK
é
Press the cursor right and enter the overriding
code 8-8-8-8.
"
Press the cursor again and enter a new
personal 4-digit code.The previous code is
erased and the new code is stored.
Once you have selected the source type, e.g.
DVD, this source will automatically be selected
when your remote control is in DVD mode,
see p. 3, and when you press the v key on
the remote control.
Centre input
When you have connected a Philips Cinema
Link surround receiver to the TV (See separate
Cinema Link instruction manual supplied) and
you have selected one of the external inputs as
centre input, the loudspeakers of the TV will
act as centre speaker, making a separate centre
speaker unnecessary.
"
Select the programme number under which
you have stored the programme coming from
your decoder.
'
Select Status .
• Select the input used to connect your decoder:
, or
None
EXT1
• Select None if you do not want the selected
programme number being activated as a
decoder programme number.
Note: Select when the decoder is connected to
EXT2
your EasyLink video recorder.
The Demo menu allows to demonstrate the TV
features separately or in a continuous loop.
If Auto demo has been selected the demo will
automatically present the features sequentially in a
loop. Press one of the cursor keys to stop the
Auto demo.
If one of the features has been selected, this
particular feature demo will run only once, and the
Demo menu will reappear.
Note: The Dealer demo is not part of the automatic
sequence and can only be activated separately.
. Follow the
Change code
in the General menu and
.
EXT2