Dual Screen / Pip / Multipip - Philips 28PW9528 Manual

Dual screen / PIP / Multipip

B
VCR DVD SAT AMP CD
†
v
Select
Ò ‡ π
®
b
æ
®
OK
® ®
®
S
MENU
+ +
V ¬ P
- -
1 2 3
4 5 6
7 8 9
i 0 0
b
Active Control
q
b h
14
Remark: Normally only pictures from external equipment connected can
be displayed in the auxiliary screen.
Full functionality is only available when having connected and activated an
EasyLink recorder (of the generation P50.2 or successive). PIP3 or PIP 12
is not available without an EasyLink recorder connected.
Press the b key to switch on Dual screen or one of the PIP
modes.
Press the b key again.The screen that has a yellow border will
become the full main screen picture.
Notes:
- Continuing to hold the b key down will cycle the TV through the
various formats launching a new format after each second the key is
held down. After standby of the TV, the preference as set in the Setup,
General menu is used.
- When Dual screen mode is selected, two picture formats are
supported: Full screen or 4:3 letterbox picture format (vertical squeeze).
- Audio from the right screen or the PIP plays to the headphones.
Display options
• With external equipment (non EasyLink) connected and
activated:
Dual screen
EXT
Press the cursor right to highlight the right screen.
Press the cursor down to highlight the single PIP screen.
• With an EasyLink recorder connected and activated:
Dual screen
REC
The tuner of the recorder is used for the right screen or for one
of the PIP modes.
For PIP 3 or PIP 12: press the cursor right to enter the Multipip
screen and then use the cursor keys to navigate through the PIP
screens and to highlight a PIP screen.
PIP
EXT
No PIP 3 or PIP 12 available
PIP PIP 3
REC
PIP 12
PIP1
PIP1 PIP2 PIP3 PIP4
PIP2 PIP5 PIP6 PIP7 PIP8
PIP3
PIP9 PIP10 PIP11 PIP12