Vcr Operation - Mitsubishi HS-M1000 Installation And Operation Manual

Table of Contents

Advertisement

INSTALLING THE BATTERIES IN THE REMOTE
CONTROL UNIT
Remove the packaging and take out the remote control unit
and the two size "R6" batteries.
Slide the cover of the battery compartment in the direction of
the arrow and remove.
Load the two batteries as shown above and replace the cover.
Make sure that the polarities, + and —, are properly aligned.
CAUTION:
e
Donot mix old and new batteries.
e
Donotheat, disassemble, short or throw batteries into a fire.
VCR OPERATION
Remote control sensor
Set the REMOTE switch to VCR A.
To operate, ensure that the transmission window on the
remote control unit is pointed towards the remote control
sensor on the VCR.
Press the desired function button.
HI When you have two Mitsubishi VCRs
Set the REMOTE switch on your new VCR to VCR B.
To operate another VCR, press the DATA ON SCREEN
button and VOLUME A
button at the same time.
USING THE JOG DIAL AND THE SHUTTLE RING
The JOG/SHUTTLE dial, located on the remote contro! unit, has
two parts; the JOG dial and, outside of it, the SHUTTLE ring.
The JOG dial will turn a full 360° without breaking. The recessed
finger hole in the dial makes turning easier and gives more
sensitive control.
The SHUTTLE ring will turn left or right a maximum of 80°. Once
the SHUTTLE ring is turned and then released, it will then spring
back to the cenire position.
The JOG dial and the SHUTTLE
ring control all on-screen
operations as well as extra fine tape transport, from frame
advance right through to speed picture search. The JOG dialalso
works for selecting channels.
Operation of the JOG dial and the SHUTTLE ring is achieved by
first pressing the 'JOG/SHUTTLE button' (or the MENU button)
on the remote control unit so that the JOG/SHUTTLE indicator
lights up. To switch the JOG/SHUTTLE
off, press the JOG/
SHUTTLE
button so that the JOG/SHUTTLE
indicator extin-
guishes.
Clockwise rotation of the JOG dial (JOG +) can be used for single
frame advance or to select the next item on the on-screen menu
or to select larger number channels. Anti-clockwise rotation
(JOG ~) can be used for single frame retreat or to select the
previous item on the on-screen menu or to select smaller number
channels.
ENG

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hs-m1000 e

Table of Contents