Front Panel - Sony SVO-5800 Operating Instructions Manual

fo feyalilicers1 ce) aM) Ml oczl a towel are Ore) aiige) i
Front Panel
The illustration below shows the SVO-5800/5800P.
REMOTE/LOCAL switch
Selects whether the unit is controlled
remotely by a device connected to the
9-pin REMOTE connector on the rear
panel (REMOTE 9P), or locally from
the front panel of the unit (LOCAL).
Indicators
(see page 8(E))
POWER switch
COUNTER RESET button
Resets the time counter of CTL.
Cassette compartment
Tape transport Indicators
Indicates the transport
status of the tape.
REW (rewind), PLAY
(playback), F FWD (fast
forward), PAUSE (pause),
REC (record) (SVO-5800/
5800P only)
HEADPHONES connector (stereo
phone Jack) and LEVEL
(headphones level) control
AUDIO LEVEL control
(SVO-5800/5800P only)
The NORM control adjusts the
audio level in normal audio
recording, and the Hi-Fi control, in
hi-fi recording (AFM recording), for
each channel.
TRACKING control
Use this control to adjust tracking when
playing back a tape recorded with another
video recorder. Set it to FIXED in ordinary
use.
CH-2 METER switch
Selects the function of the CH-2 indicator of
the audio level meter. It can be used as an
audio level meter (AUDIO) or as a tracking
meter (TRACKING).
VIDEO IN SELECT switch
(SVO-5800/S800P only)
Selects the video signals to be
input to the unit. When it is set to
the BLACK position, the built-in
black burst signal is selected,
which is convenient for making a
tape to be edited.
METER switch
Selects the audio signals to be
displayed on the audio level meter
(normal audio or Hi-Fi).
REMOTE connector
(minijack)
Connects the SVRM-100
remote control unit (not
supplied), etc.
Tape transport control buttons
EJECT (cassette eject) button
REC (record) button (SVO-5800/
5800P only)
Press the PLAY button while
pressing this button to start
recording.
STOP button
REW (rewind) button
PLAY (playback) button
F FWD (fast forward) button
PAUSE button
"MONITOR OUT CH-1/MIX/CH-2 selector
Selects the audio signals to be output through the
HEADPHONES connector or MONITOR AUDIO connector.
When it is set to the MIX position, stereo sound is output through
the HEADPHONES connector, and mixed sound of channel 1 and
channel 2 through the MONITOR AUDIO connector.
7(E)
Identification of Parts and Controls
identificatio of Parts and Controls | || || | || | | | | || |