Possible Reasons For Increased Levels Of Foaming; Stretching Of Large Items; Continuing A Program After A Power Failure - Miele PWM 912 Operating And Installation Instructions

Possible reasons for increased levels of foaming

Problem
Excessive foaming during
the wash cycle.

Stretching of large items

Problem
Large items stretched dur-
ing spinning

Continuing a program after a power failure

If a running program is interrupted, e.g., by a power outage, the program can be continued
when power is restored.
Switch on the washing machine with the  button.

Then press "START".

The program will then continue with the next program stage.
Possible cause and solution
You are using an unsuitable detergent.
Only use detergent suitable for use in commercial wash-

ing machines. Domestic laundry detergent is not suit-
able.
You are using too much detergent.
Dispense detergent following the instructions on the

packaging and in accordance with local water hardness.
You are using very soft water.
In areas with water hardness level 1, add less detergent

in accordance with the detergent manufacturer's instruc-
tions.
The items of laundry are only slightly soiled.
For lightly soiled laundry, add less detergent in accor-

dance with the detergent manufacturer's instructions.
There are residues in the laundry (e.g., from detergent).
Additionally, pre-rinse the laundry without setting a tem-

perature and using detergent.
The load is too small.
Reduce the amount of detergent.

The drum speed is too high during the wash cycle.
Reduce the drum speed and wash rhythm.

Possible cause and solution
Large items can get stretched during spinning.
This can mostly be prevented by reprogramming. Con-

tact Customer Service.
Frequently asked questions
39