Program Start - Program End - Miele PWM 912 Operating And Installation Instructions

Program start – program end
30
Starting a program
The program can be started as soon as the Start/Stop sensor control
is flashing on and off.
Touch the Start/Stop sensor control.

The door will lock ( symbol) and the wash program will start.
 Status

Time left
Whites
 program info
Tip: You can use the pull-down menu to display the selected temper-
ature, spin speed, and any selected Extras.
If a delay start period ( Timer) has been selected, this will appear in
the display at the bottom left.

Overview

9,0/9,9 kg
Whites
90 °C
0:56 h
01.01 11:00 Help
If you select the  program info selection area, all program-related
information will be displayed.

Program info

1: Time after start: min

2: Program finish time:
3: Block:
4: Step:
 program info
The program duration will appear in the display either straight away or
once the delay start period has elapsed. The program sequence is
also shown in the display.
Depending on the setting selected in the supervisor level or in the
program, the machine will switch to the anti-crease action cycle at
the end of the program. The door remains locked. The door can be
unlocked at any time by touching the Start/Stop sensor control.
Removing the laundry
Pull open the door.

Remove the laundry.

 11:02

2:27
Washing and heating
10:00
1300 rpm
Extras
Detail
 11:02

2:27