Step 2.
Peel back the mylar, disconnect the EDP cable, and remove the LCD panel.
Figure 30. Disconnect the EDP cable and remove the LCD panel
Go to
https://support.lenovo.com/partslookup
replacement part:
LCD panel
Remove the camera board
Make sure the following FRUs (CRUs) have been removed.
"Remove the lower case" on page 30
"Remove the LCD module" on page 46
"Remove the LCD bezel" on page 48
"Remove the LCD panel" on page 49
Step 1.
Disconnect the camera cable from the camera and remove the camera board.
50
Hardware Maintenance Manual
to look up the Lenovo part numbers of the following