Aiwa CT-X417 Operating Instructions Manual page 9

Seek tuning
Press and hoid either TUNE/\ (up) or TUNE N/- (down) for more than 0.5 second to activate the seek
function. The unit automatically tunes in the next station with good reception. Press the button again to
cancel the function. Repeat the procedure until the desired station is tuned in.
To turn the radio off
Press PW. The frequency indication goes off at the same time. If you insert a cassette, the radio mode
will automatically be canceled as well.
The L0 (local/DX) button
You can use the local mode when you want to tune in only the strong signal stations during seek tuning.
In the radio mode, press LO to select the local mode. The "LOC" indicator lights up.
•When you are not seek tuning, leave the unit in the DX (distance) mode.
To cancel the local mode and enter the DX mode, press LO again.
• The "ST" (stereo) indicator lights up when the tuned station is broadcasting in stereo and the reception
condition is good.
The ST (stereo/monaural) button
You can switch between the stereo and monaural modes by using this button. When the radio reception
is not good, that may be improved by switching to the monaural mode. The mode is alternately changed
each time you press this button. When in the monaural mode, the "MONO" (monaural) indicatorappears.
IEN
9