Table of Contents
Advertisement
PXefollelemn (csr mctolvlete Mele MoM Ale(s1o Mm K-yel-melUlalale|
MATol=Yom =tolistare,
During video tape editing, you can add the desired sound
on the recording VCR from various audio program sources.
= Video signals
= Audio signals
VIDEO OUT/
(j-=2
Coccoccccrereeeeeee
6
| o GREE Laisa
t
DAT deck
1 Select the playback VCR with EDIT VIDEO.
To select VCR 2, press EDIT VIDEO so that "2c 1°
appears on the display.
To select VCR 3, press EDIT VIDEO so that "3 1°
appears on the display.
2 Set the playback VCR to the playback mode.
3 At the point where audio dubbing starts, press
the pause button on the playback VCR.
4 Press EDIT AUDIO.
EDIT
VIDEO
AUDIO_¢P!
AUDIO appears on the display.
5 Select the audio program source.
6 Release the pause mode of the playback VCR
and set the VCR 1 to the recording mode.
7 Start playback of the selected audio program
source,
Video dubbing starts and the audio program source
is also recorded on the VCR 1 simultaneously.
Advertisement
Table of Contents
