Table of Contents
Advertisement
HELP MaRS AE «SBOE
ce eat
(STR-GX909ES only)
The STR-GX909ES has the on-screen-display function.
When ON SCREEN of this receiver is set to on, the
information concerning with the operation you will perform
appears on TV monitor screen connected to the receiver.
ON SCREEN ON/OFF
The on-screen-display function is available in the following
modes:
— Opening screen
— Selecting a function
— Tuner operation
— Sound field function
— Parameter adjustment of the surround effect
When the each operation is finished, the screen returns to
the opening screen.
To stop the on-screen-display function
Press ON SCREEN.
16
You can enjoy superb sounds using the audio adjustment
functions as shown below.
MASTER
DBFB VOLUME
PXohierciciaremrce)(o nuts
To adjust volume
Turn MASTER VOLUME.
To reduce the sound to a low level temporarily (— 20 dB
attenuation)
Press MUTING. The indicator lights up.
Press again to restore the same listening level as before.
PNeflecselnlem mojamelalemat(e|stmerelslacem sf-li-l ate)
Adjust BALANCE to correct stereo imaging, when the
speaker position is not symmetrical.
Reinforcing the Bass
Press DBFB (Dynamic Bass Feedback) so that the DBFB
indicator lights up. Press again to turn off the effect so that
the indicator goes off.
Selecting the Speaker System
To drive speaker system A: Set SPEAKERS to A.
To drive speaker system B: Set SPEAKERS to B.
To drive both speaker systems A and B (parallel
connection): Set SPEAKERS to A + B.
For headphone listening: Connect headphones to
HEADPHONES and set SPEAKERS to OFF.
Advertisement
Table of Contents
