Table of Contents
Advertisement
If you make connections to another room, you can use the
remote control to select source components and to adjujst
the volume (etc.) output to the other room.
~ 5.
*KENWOOD
system control operations are only possible when the
remote control is set to the Room A operation mode. In order to avoid
malfunctions, do not make system control connections to audio com-
ponents which you plan on controlling with the Room B operations
described below.
Only sources connected to the analog AUDIO (L and R)
and VIDEO jacks can be output to ROOM B.
OR,
Select a speaker system.
A
SPEAKERS
B
q
The ingicator tor the speakers and room you want to use
snould be lit."
2
Set the remote control to the ROOM B
operation mode.
Press the FUNCTION
SHIFT key
and then press the ENT (ROOM
B) key within 3 seconds.
ROOM B
q
"=O.
om
\
Ej Select the desired component.
Press the VIDEO
or AUDIO
key
repeatedly
to set the ROOM
B
input selector to the component
Pan.
you desire.
Cw,
AUDIO
VIDEO
C)
WV
Execute the desired operations.
Controlling the sound in another ro
) your. remote contro
d ;O20VR {En/K}
Beha
ad
A °
fOr
{
te
oO
Of FIO
10)
O!OIO:01
aE
Keys or controls used in this operation.
room om (ROOM B)
ON
ee ere nt
AlOi()
You can also purchase an additional remote control unit
for use specifically in ROOM B. Please consult your local
KENWOOD dealer for more information (U.S.A. only).
* Audio and video signals are output from the SECOND ROOM PRE
OUT jacks regardless of the setting of the SP. A/B and ROOM A/
B indicators.
AON
: Select to output sound to ROOM A from the speaker
connected to the SPEAKERS A terminals. This set-
ting allows you to enjoy surround playback in ROOM
A while outputting sound to ROOM B via the SEC-
OND ROOM
PRE OUT jacks.
BON
: Select to output sound to ROOM B via the speakers
connected to the SPEAKERS B terminals. Be sure to
turn off the subwoofer
in ROOM A if one is con-
:
nected.
A+B ON : Select to output sound to ROOM A from the speakers
connected to the SPEAKERS A terminals and output
sound to ROOM B from the speakers connected to
the SPEAKERS B terminals.
ROOM A automatically switches to stereo playback
(surround playback is not possible}.
A+B OFF : No sound from the speakers. Use this setting when
listening with headphones
in ROOM A for stereo
sound inall playback modes ortolisteninROOMBvia
}
the SECOND ROOM
PRE OUT jacks.
¢ The MUTE and VOLUME
+/- keys jet you control the sound level in ¢
ROOM
B.
Toe
om oo att
= LL LT
|
ROOM B input selector
¢ The setting of the ROOM B input selector also appears in the on screen
display.
* The component selected for ROOM B can also be operated using the
keys on the remote
control. See "Remote
operation of other compo-
nents' for a list of keys available with each component.
~ 58.
The remote remains in the ROOM B operation mode until
you switch back to the ROOM A operation mode.
To return to the ROOM A operation mode, press the FUNCTION
SHIFT key and then press the +10 (ROOM
A) key within 3
Advertisement
Table of Contents
