Speaker Placement - Kenwood 1090VR Instruction Manual

Audio video surround receiver
Hide thumbs Also See for 1090VR:
Table of Contents

Advertisement

cet
Meche
a
a
To obtain the most possible enjoyment from the receiver's various surround modes, be sure to complete the surround set up
as shown below.
Speaker placement.
Front speakers : Place to the front left and right of the listening position. Front
speakers are required for all surround modes.
Center speaker : Place front and center. This speaker stabilizes the sound image
and helps recreate sound motion. Be sure to connect a center speaker when
using the Dolby 3 Stereo mode.
Surround speakers : Place to the direct left and right, or slightly behind, the
listening position at even heights, approximately 1 meter above the ears of
the
listeners.
These
speakers
recreate
sound
motion
and
atmosphere.
Center speaker
= /
a
Subwoofer
Front speaker
\
Required for surround playback.
Subwoofer : Reproduces powerful deep bass sounds.
/ Surround speaker
e Although the ideal surround system consists of all the speakers listed above, if you don't
have a center speaker or a subwoofer, you can divide those signals between the available
speakers in the foliowing steps to obtain the best possible surround reproduction from the
speakers you have available.
¢ Pressing the MAIN
icon lets you access
the main sound menu.
— 35,
3 Select the speakers and enter the speaker distance.
© Specify the type of speakers you connected to the receiver.
Move the pointer downward
(icon turns blue).
Use the TUNING/SKIP keys to specify the setting you desire.
Press the BAND (p/11) key to confirm the setting (icon turns yellow).
Repeat steps 2: and 3 to specify a setting for each speaker type.
° Be sure to specify settings for each speaker type before continuing to the next
screen.
SW : Subwoofer
ON: Select when using a subwoofer.
OFF: Select when not using a subwoofer.
LR:
Front speakers (left and right)
SML (smal!): Select when using a relatively small front speakers.
LRG (large): Select when using a relatively large front speakers.
C : Center speaker
SML (small): Select when using a relatively small center speaker.
|
LRG (large): Select when using a relatively large center speaker.
OFF: Select when not using a center speaker.
S : Surround speakers (left and right)
SML (small): Select when using a relatively small surround speaker.
LRG (large): Select when using a relatively large surround speaker.
OFF: Select when not using surround speakers.
Bwn
© Continue to the SP.LVL (speaker level) screen.

Advertisement

Table of Contents
loading

Table of Contents