Table of Contents
Advertisement
Preparing
for surround
sound
1OSOVR
(En/K)
Adjust the volume levels of each speaker.
Z
© Select the test tone type.
|
AUTO
: The test tone switches between each speaker in regular intervais.
MANUAL : The test tone only comes from the selected speaker (displayed in blue).
3)
OFF
: Stops the test tone.
© Adjust the Volume level of each speaker.
'SPEAKER
1 Listen to the test tone and select the speaker you want to adjust.
Re
* LEVEL
¢ The selected speaker icon turns blue and the speaker name and level appear (at the bottom of f
the screen} to show that it can be adjusted.
7)
2 Listen to the test tone and adjust the volume level of the speaker (+10 dB) using the
TUNING/SKIP keys on the remote control.
:
e
TUNING/SKIP - : Lowers the volume TUNING/SKIP + : Raises the volume
¢ Adjust the subwoofer as you desire.
© Continue to the SP.DIST (speaker distance) screen.
G
Enter the speaker distance.
© Select the speaker.
© Enter the speaker distance.
Use TUNING/SKIP on the remote contro! to select the appropriate distance.
DISTANCE
The distance !s adjustable from 0.0meters (0 feet) to 9.Ometers (30 feet) in 0.3meter {1 foot)
@ Select the input.
SET UP
© Select an input level.
The input level is adjustable in 3 levels. Use TUNING/SKIP on the remote contro! to select the
smallest level required to extinguish the LEVEL
INDICATOR
(normally, set to 0 dB)
0 dB ++ -3 dB ++ -6dB
LEVEL
This completes the surround setup.
Advertisement
Table of Contents
