Advertisement
Available languages
Available languages
How to Adjust the Channel Setting
XM-1446S
ego
Lrg
O
XM-1446G
Opening the door
To open the door, press at the location marked with a "A".
Setting and Storing Desired Stations
1. Set the band selector according to the
desired channel to VHF or UHF: "VL",
"VH" or "U", 11 rectangles " mm" and the
channel programme
number are then
displayed
in the upper
part of the
screen.
2. Press the channel selector (A or v)
to set the required channel programme
number.
3. Press the fast tuning button and a tuning
button (A or V) simultaneously, and then
release for fast tuning. When the required
channel is nearly tuned, press a tuning but-
ton (A or V) to stop fast tuning, and then
continue to press it until the channel is fine
tuned.
Notes:
1) The fast tuning button is for searching for
the required channel at a fast speed. This
4. When the tuning button (A or Vv) is released
after properly tuning the channel, the chan-
nel will be stored in the memory.
gramme numbers and speed up chan-
nel selection (when no programme is
broadcast for instance), press the skip
button.
When the skip button is pressed, a red
" HE" will be displayed to the left of the
channel
programme
number
as.
il-
lustrated,
indicating that the channel
skip setting has been completed. Press
the skip button once again to cancel the
skip mode.
button must always be pressed simultane-
ously with a tuning button (A or v).
) Even if your fingers are released from the
fast tuning button/Auning button (A or Vv)
after pressing them, channel searching
will continue until a tuning button (A or
V) is pressed. (Please note this is not
automatic channel searching. A tuning
button (A or V) has to be pressed to
stop continuous channel searching)
The fast tuning button does not work in-
—
Note:
:
When the(A) tuning button is pressed, the
green rectangles "Mi" displayed following
the "VL", "VH" or "U" turn red from left to
right. Also, when the (Vv) tuning button is
pressed, the red rectangles " @™" turn green
from right to left.
6. Repeat the above steps to store all other
channels.
dependently.
Advertisement
