Rear Panel; Right Side Panel - Kenwood TM-401A Instruction Manual

© REV switch
REV
O
@ TX OFFSET switch
TX
OFFSET + -
Area
—1.6 MHz }—7.6 MHz
Europe
(D-A) (D-B)
England | +1.6 MHz|—1.6 MHz
@ REAR PANEL
@ ANT connector lead
@ DC Power Terminal
® SP Terminal
@ RIGHT SIDE PANEL
Connect a 50-ohm antenna to this terminal.
DC power input terminal. Connect the supplied power cord with plug. Input
voltage is 13.8 V DC.
Observe plus (+) and minus (—) polarity!
Connect the supplied 8 ohm speaker to this jack.
® Remote jack
7