Advertisement
Operations
D
Power Switch
Push this switch to turn the monitor ON/OFF.
When the power is ON, one of the Input Mode Indicators light.
D) Input Mode Indicators
When the power is ON, the selected input mode is indicated.
Cc
coo
å A
pa BGR
6) Input Selection Button (VIDEO/S-VIDEO)
Push this button to select S-VIDEO or VIDEO input.
VIDEO
6 This function is only available when VIDEO input was selected with Input
Selection Button (RGB MULTIMIDEO).
@ Selected input mode is shown on the Input Mode Indicators ®©.
S-VID
(4) input Selection Button (RGB MULTI/VIDEO)
Push this button to select VIDEO or RGB MULTI input.
RGB MULTI
@ Selected input mode is indicated on the Input Mode Indicators ©.
@ When the RGB MULTI is selected, it is able to select RGB or VIDEO signal within
the RGB terminal by using YS signal through the RGB terminal.
@ When the VIDEO is selected, VIDEO or S-VIDEO input will appear due to the
condition of the Input Selection Button (VIDEO/S-VIDEO).
(see page 9 ~ 10)
Set this switch to OFF position to prevent unexpected changes of the adjustments.
ON ... All controls can be operated.
OFF.. Only power on/off and input selection can be operated.
(©) Control Mode Select Switch
Set this switch to determine which adjustments will be done.
FUNC-1
FUNC-1
..... Picture and Volume
FUNC-2}..... Size, Position and Side-pincushion
Advertisement
