Advertisement
Precautions
Do not attempt to disassemble the monitor.
To prevent electric shock, do not remove the screws or cover. There are no user-serviceable parts inside.
Refer servicing to qualified service personnel.
Do not use this monitor beyond its temperature and humidity range.
(a) This unit is designed for indoor use. Ambient temperature must not exceed the range of 32°F~104°F
(0°C~+40°C).
(b) Avoid using the monitor when the humidity is either above 80% or less than 20%.
(c) Do not block the ventilation slits on the rear cover. If rack mounted, allow ventilation space or force to cool the
unit.
Locate this monitor in a place where it will not be directly subjected to steam or smoke.
Set the monitor in a level, stable condition.
Placing the monitor on its side, facing upward, or upside down will make it impossible to guarantee performance;
furthermore, this will have a damaging influence on the internal parts and could be the cause of fire or breakdown.
Do not allow the CRT screen to be in the path of direct sunlight or that of illumination light.
A clear picture cannot be obtained when light enters the CRT screen.
Items that produce magnetic fields such as magnets and speaker systems should not be brought close to this
monitor.
Do not subject the monitor to strong vibrations or impacts
This can cause breakage of the CRT or damage it.
Do not insert sharp objects into the monitor.
They may cause a fire, accident or failure.
If the unit does not operate properly, turn off the power switch and remove the power plug from the outlet.
Remove the AC power cord from wall outlet when the monitor is not in use for a prolonged period.
Advertisement
