Table of Contents
Advertisement
Attaching or Removing the Base
1.
Place the display unit flat on a table. Afterwards attach the plastic base onto the neck by form
fitting the circular hole. Remember the plastic base should have more area facing the front of
the neck. Fit the metal plate onto the bottom of the base by matching the 3 holes. Screw in the
4 thick threaded screws to secure the metal plate to the plastic base. The stand installation
is now complete.
2.
To install or remove the stand, screw in or remove the 4 screws indicated in the picture and
the stand will come off.
3.
To finalize your installation of the Display, please read the following:
a.
If you are placing the Display on a stand, we would recommend you to use a
Display safety strap (not included) in order to minimize the possibility of the Display
toppling over.
b.
If you are mounting the Display on the wall
c.
Make sure the wall is structurally safe for the weight of the Display
d.
Make sure the wall mount kit is compatible with the Display
e.
Read and follow all instructions provided by the wall mounting kit.
f.
Securely install all screws and connections.
- 8 -
www.SCEPTRE.com
SCEPTRE E32 HD Display User Manual
Advertisement
Table of Contents
