LG F4Y913 CTA1 Series Owner's Manual page 51

Symptoms
Vibrating noise
Operation
Symptoms
Water is leaking.
Appliance does not
operate.
Not all levelling feet are resting firmly and evenly on the floor.
• See the Levelling the Appliance instruction to adjust the levelling of the
appliance.
Floor not rigid enough.
• Check if the floor is sold and does not flex. See the Installation Place
Requirements to select the proper location.
House drain pipes are clogged.
• Unclog waste pipes. Contact plumber if necessary.
Leakage is caused by improper installation of drain hose or clogged
drain hose.
• Clean and straighten the drain hose. Check and clean the drain filter
regularly.
Drain pump filter cap is not fitted correctly.
• Refit the drain pump filter.
Control panel has powered off due to inactivity.
• This is normal. Press the Power button to turn the appliance on.
Appliance is unplugged.
• Make sure that the cord is plugged securely into a working outlet.
Water supply is turned off.
• Turn the water supply tap completely.
Controls are not set properly.
• Make sure that the programme is correctly set. Close the door and press
the Start/Pause button.
Door is open.
• Close the door and make sure that nothing is caught under the door
preventing it from closing completely.
Circuit breaker/fuse is tripped/blown.
• Check house circuit breakers/fuses. Replace fuses or reset breaker. The
appliance should be on a dedicated branch circuit. The appliance will
resume the programme where it stopped once power is restored.
Control needs to be reset.
• Press the Power button, then reselect the desired programme and press
the Start/Pause button.
TROUBLESHOOTING
Possible Cause & Solution
Possible Cause & Solution
51