LG F4Y913 CTA1 Series Owner's Manual page 50

TROUBLESHOOTING
50
Symptoms
E dz
ezDispense ERROR 2
E d3
ezDispense ERROR 3
E d4
ezDispense ERROR 4
E ds
ezDispense ERROR 5
O PN
ezDispense OPEN
ERROR
Noises You Might Hear
Symptoms
Rattling and clanking
noise
Thumping sound
Vibrating noise
The amount of liquid detergent in the detergent compartment did not
decrease.
• Call for service.
The amount of fabric softener in the liquid fabric softener or liquid
detergent compartment did not decrease.
After putting the fabric softener into the liquid fabric softener or liquid
detergent compartment, it was left for a long time and the fabric
softener hardened.
• Clean the liquid fabric softener or liquid detergent compartment
thoroughly, fill it with liquid fabric softener, install it in the drawer, and run
a wash cycle. If
E d3
The amount of liquid fabric softener in the liquid fabric softener or liquid
detergent compartment did not decrease.
• Call for service.
The amount of liquid detergent or fabric softener in the liquid fabric
softener or liquid detergent compartment did not decrease.
• Call for service.
The washer was operated without completely closing the drawer.
The drawer was opened during the washer operation.
• Push the drawer completely closed. If
for service.
Foreign objects, such as keys, coins, or safety pins may be in the drum.
• Stop the appliance, check the drum for foreign objects. If the noise
continues after the appliance is restarted, call for service.
Heavy clothes may produce a thumping sound. This is usually normal.
• If the sound continues, the appliance is probably out of balance. Stop and
redistribute the clothes.
The clothes may be out of balance.
• Pause the programme and redistribute the clothes after the door unlocks.
Package materials are not removed.
• Remove package materials.
The clothes may be unevenly distributed in the drum.
• Pause the programme and redistribute the clothes after the door unlocks.
Possible Cause & Solution
is displayed continuously, call for service.
O PN
Possible Cause & Solution
is displayed continuously, call