LG F4Y913 CTA1 Series Owner's Manual page 38

OPERATION
38
NOTE
• Once this function is set, all buttons are locked
except the Power button.
• When the controls are locked,
remaining time are alternatively shown on the
display during the wash while this function is
engaged.
• Turning off the power will not reset this function.
You must deactivate this function before you can
access any other functions.
Locking the Control Panel
1
Turn on the power.
2
Press and hold the Delay End and Add Item
buttons at the same time for 3 seconds to
activate this function.
• A beeper will sound, and
the display.
Unlocking the Control Panel
1
Turn on the power.
2
Press and hold the Delay End and Add Item
buttons at the same time for 3 seconds to
deactivate this function.
Beep On/Off
This appliance plays a melody when it starts and
stops.
• Press and hold the TurboWash and Pre Wash
buttons simultaneously for 3 seconds to
deactivate/activate this function.
and the
CL
will appear on
CL