Dell DR4300 System Owner's Manual page 98

Figure 43. Identifying connectors on the expansion card riser 3 (default)
a. expansion card slot 6
b. expansion card slot 7
c. power connector (for GPU cards)
Figure 44. Identifying connectors on the expansion card riser 3 (alternate)
a. expansion card slot 6
b. power connector (for GPU cards)
Next steps
1. If removed, install an expansion card on the riser.
2. If applicable, replace the expansion card riser.
3. Follow the procedure listed in the After working inside your system section.
Related tasks
Before working inside your system
Removing an expansion card from expansion card riser 2 or 3
Removing an expansion card from the expansion card riser 1
Installing an expansion card into the expansion card riser 1
Installing an expansion card into the expansion card riser 2 or 3
After working inside your system
98 Installing and removing system components