Table of Contents
Advertisement
7
Heat the 2 microwaveable heating bags for 40-60 seconds in a 700 W microwave and
apply each one at the front and back of the right edge of the device for 1 minute.
8
While maintaining the heating bag under the back of device, place the suction cup (L)
in the center of the right edge of the screen, lift upwards carefully, and then insert
the opening pick in the gap.
As the internal circuitry can be damaged, do not insert the opening pick more
•
than 3 mm.
As the screen can be damaged by excessive force, be careful not to damage the
•
screen.
If you have trouble creating a gap, heat the microwaveable heating bag
additionally, and apply it on the screen to further soften the adhesive. When
reheating, it should be heated no longer than 40-60 seconds.
Disassembly and Assembly
69
Advertisement
Table of Contents
