Table of Contents
Advertisement
12
Using the tweezers, separate the FPCB of speaker module carefully.
Insert the tweezers into the separator groove of the speaker and remove it from back
cover module.
Be careful not to damage the speakers and cables.
If you have trouble creating a gap, heat the microwaveable heating bag
•
additionally, and apply it on the speaker to further soften the adhesive. When
reheating, it should be heated no longer than 30 seconds.
The cables and connectors may vary depending on the country, region, or
•
specifications.
Disassembly and Assembly
116
Advertisement
Table of Contents
