Broan E64000 Series Installation Instructions Manual page 5

1. SELECT BLOWER OPTION AND INSTALLATION TYPE
1.1 Non-DucTED INSTALLATION
For a non-ducted installation, a non-duct kit ANKE60 Series (sold separately) must be installed. For maximum effectiveness,
we recommend installing this kit with a single (internal) blower hood. The kit fits hoods from 30-inch width up to 48-inch
width. See installation instructions included with the non-duct kit ANKE60 Series.
1.2 DucTED INSTALLATION
The Broan Elite E64000 Series range hood includes many configurations: hood with single or double internal blowers
(included with the hood), or hood using external blowers. For hood using external blowers, the Broan Elite E64000 Series
must be installed with in-line blower models HLB3, HLB6, HLB9 or HLB11, or exterior blower model 331H, 332H, 335 or
336 only. Other blowers cannot be substituted. (Blowers sold separately).
Plan where and how the ductwork will be installed.
If installing in-line blower, refer to instructions packed with in-line blower and follow steps 1, 2, 3, 4, 10 and up of
this manual.
Install proper-sized ductwork, elbows and roof or wall cap for the type of blower you are installing. If using 7", 8" or 10"
round ducts, use a transition (internal blower(s) only). Use 2" duct tape to seal duct joints.
The minimum hood distance above cooktop must not be less than 24". A maximum of 30" above cooktop is highly
recommended for best capture of cooking impurities.
Distances over 30" are at the installer and users discretion.
Roof cap Roof cap
ps
1 10" round duct
4 _ 3%" x 10" duct
or 7" or 8" round duct Ate" x 18%" to 10"
31%" x 10" to 7" or transition
Wall 3%" x 10" to 8" transition Wall
cap A (if using round duct) cap
/
cH
(ie
oo
24" minimum above bog minimum above
cooking surface cooking surface
HHOO85A LJ HHOOB6A
SINGLE INTERNAL BLOWER DOUBLE INTERNAL BLOWERS
TYPICAL DUCTWORK TYPICAL DUCTWORK
Roof cap
10" round duct (except
HLB3, 8" round duct)
In-line blower
— 10" round duct (te \
ooo Ce eee |
Wall
| | , | | | cap
Hood <a
t Hood
24" minimum
24" minimum above
above cooking
cooking surface
surface
HHOO87A HHOOS2A ws
MODEL 331H, 332H, 335 OR 336 MODEL HLB3, HLB6, HLB9 OR HLB11
EXTERIOR BLOWER IN-LINE BLOWER TYPICAL DUCTWORK
TYPICAL DUCTWORK