Panasonic EYFLA7AR Quick Programming Manual page 6

Learning tools to the Qualifier continued
To the right, is an example of 2 tools learned to the Qualifier.
• One tool is in One-Way mode "90"
• The other tool is in Two-Way mode "91"
Note the difference in illustration 1
• Tool 1 is in Two-Way and displays the
• Tool 2 is in One-Way mode and displays
Switching from One-Way mode to Two-Way mode
If you learn a tool in One-Way mode "90" and want to relearn it
to Two-way mode "91", you must "forget" the tool first.
1. Change the "Communication Mode' in the tool from "90 to
"91"with the remote (page 3).
2. Go to the Tool tab, "edit' then "Forget".
3. Then learn the tool to the qualifier (page 4)
Two-Way Quick Programming Guide
(Model number)
(OK/NOK)
1