Installation And Connection; Scope Of Supply; Technical Specifications; Installing The Appliance - Bosch KFN96 Series Installation Instructions And Instructions For Use

Don't
– The product should not be opened by the user
himself/herself, but only by authorized service
personnel.
– The product is not meant for re-sale to any
unauthorized agencies/scrap dealer/kabariwalah.
– The product is not meant for mixing into
household waste stream.
– Do not keep any replaced spare part(s) from the
product in exposed area.
Any disposal through unauthorized agencies/person
2.
will attract action under Environment (Protection)
Act 1986.
This product doesn´t use any hazardous -
Note:
substances as specified in the E-waste (Management)
Rules 2016.
5 Installation and
connection
S cope of supply
I n s t a l l a t i o n a n d c o n n e c t i o n
After unpacking all parts, check for any damage in
transit.
If you have any complaints, contact the dealer from
whom you purchased the appliance or our Customer
Service.
~ "Customer Service" on page 27
The delivery consists of the following parts:
Free-standing appliance
■
Interior fittings (depending on model)
■
User manual
■
Customer service booklet
■
Warranty enclosure
■
Information on the energy consumption and noises
■

Technical specifications

Refrigerant, cubic capacity and further technical
specifications can be found on the rating plate.
~ "Getting to know your appliance" on page 11

Installing the appliance

Installation location
The more refrigerant an appliance contains, the larger
the room in which the appliance is situated must be. In
rooms which are too small, leaking refrigerant can form
a flammable gas-air mixture.
At least 1 m³ of room space is required per 8 g of
refrigerant. The amount of refrigerant in your appliance
is indicated on the rating plate inside the appliance.
~ "Getting to know your appliance" on page 11
The weight of the appliance may be up to 185 kg
depending on the model. The base must be sufficiently
stable, and should not give. If necessary, reinforce the
floor.

Installation and connection

Permitted room temperature
The permitted room temperature depends on the
climate class of the appliance.
Information on the climate class can be found on the
rating plate.
~ "Getting to know your appliance" on page 11
Climate class
SN
N
ST
T
The appliance is fully functional within the permitted
room temperature.
If an appliance with climate class SN is operated at
colder room temperatures, the appliance will not be
damaged up to a room temperature of +5°C.
Minimum clearances
Leave a distance of 300 mm above the appliance.
Observe minimum clearances as follows:
50 mm
100 mm
Ventilation
Never cover or block ventilation openings.
Permitted room temperature
+10°C ... 32°C
+16°C ... 32°C
+16°C ... 38°C
+16°C ... 43°C
100 mm
en
5