Customer Service; Appliance Self-Test; Obtaining Advice And Ordering Repairs If A; Fault Occurs - Bosch KFN96 Series Installation Instructions And Instructions For Use

Hide thumbs Also See for KFN96 Series:
Table of Contents

Advertisement

The alarm off button flashes and a warning signal sounds.
Refrigerator compartment, cool-fresh compartment or freezer com-
partment is open.
Ventilation openings are covered up.
Large quantities of fresh food were placed in the appliance.
The temperature in the refrigerator compartment, cool-fresh compart-
ment or freezer compartment is too warm.
Appliance is not cooling, display and lighting are lit.
Showroom mode switched on.
--------

4Customer Service

I f you are unable to rectify the fault, please contact our
C u s t o m e r S e r v i c e
Customer Service. We will always finds a suitable
solution to avoid unnecessary visits by technicians.
The contact information for your nearest Customer
Service office can be found here or on the enclosed
Customer Service list.
When calling, please state the product number (E-Nr.)
and the production number (FD), which can be found
on the rating plate.
~ "Getting to know your appliance" on page 11
You can trust in the manufacturer's expertise. You
can therefore be sure that the repair is carried out by
trained service technicians who carry original spare
parts for your home appliances.

Appliance self-test

Your appliance features a self-test programme; this
displays the fault which your Customer Service team
can rectify.
Switch the appliance off and wait 5 minutes.
1.
Switch on the appliance.
2.
Within the first 10 seconds press and hold
3.
menu button for 10 seconds until an audible signal
sounds.
The self-test programme starts. While the self-test is
running, a long audible signal will sound.
If 2 audible signals sound after the end of the self-
test and the set temperature is displayed, your
appliance is OK.
If after the self-test 5 audible signals sound and the
menu button flashes for 10 seconds, inform
Customer Service.
The appliance switches to normal operation once the
programme has ended.
Press alarm off button. The alarm is switched off.
Close the appliance.
Clear the ventilation openings.
Do not exceed maximum freezing capacity.
Press alarm off button. After the alarm off button is pressed, the
warmest temperature reached in the freezer compartment is dis-
played for 5 seconds. The display stops flashing.
Start the appliance self-test.
~ "Appliance self-test" on page 27
When the programme has ended, the appliance switches over
to normal operation.

Obtaining advice and ordering repairs if a

fault occurs

Contact information for all countries can be found on
the enclosed Customer Service list.
GB
0344 892 8979
IE
01450 2655
US
800 944 2904
--------

Guarantee

Detailed information on the warranty period and
warranty conditions in your country are available from
your customer service, your dealer and on our website.
Customer Service
Calls charged at local or mobile rate
0.03 € per minute at peak. Off peak
0.0088 € per minute.
toll-free
en
27

Advertisement

Table of Contents
loading

Table of Contents