Change Code; Programme Selection; Controls - Miele PDR 910 EL SOM Operating And Installation Instructions

- lb

Change code

You can alter the access code to the Supervisor level.
Enter the current code.

Enter a new code.


Programme selection

Controls

You can select whether the tumble dryer is operated as a "launderette" machine. Short-
cuts are the easiest way to operate the machine. Operating staff are unable to change
pre-set programmes.
Tip: Start by configuring all necessary settings and changes to the tumble dryer before ad-
justing any of the options below.
Caution: When activating any of these options, the Supervisor level will no longer be
available.
You will no longer be able to access the Supervisor level via the display. Please follow
the instructions below if you wish to change any other settings.
Opening the Supervisor level (launderette version)
Switch the tumble dryer on and open the dryer door.

Touch the Start/Stop sensor and hold it down whilst carrying out steps -.

Close the dryer door.

Wait until the Start/Stop sensor, which will now be flashing quickly, lights up con-

stantly ...
... and then release the Start/Stop sensor.

Standard
-
Factory default: all (selected) programmes are available.
Launderette, basic
-
12 programmes are available.
Under Favourite programmes
modify.
Laundrette Logo
-
12 programmes are available.
Favourite programmes
Under
Laundrette Logo ext. time
-
4 timed drying programmes* with different temperature levels are time-controlled via an
external payment system.
The set value indicates the programme running time and cannot be modified by the user.
* The maximum programme running time is specified during initial commissioning.
, you can set which of the 12 programmes to select or
, you can set which 12 programmes to select/modify.
Supervisor level
47